Printer Care Tips or How to take care Printers

Actually there is nothing special in the printer maintenance tips or how to maintain the printer. But if we do it correctly will greatly affect the performance and age of our printers use.

Here I am sharing a printer or care tips on how to maintain the printer according to my personal experience, especially inkjet printer that uses the Liquid Ink:
1. Use the printer periodically and regularly. Do not let the printer “unemployed” in a long time. Every day or every other day the printer must be used to print at least 2 to 3 pieces and ensure perfect print results. Try printing balanced in terms of color … that is not just black but the print text / image that contains elements of black, red, yellow and blue (colors) that are expected to work all the Head. It aims to keep the ink in the Print Head is not dry / clot.
2. Do not let the cartridge / ink tank is empty in a long time. Immediately fill the ink cartridges when starting blank / out.
3. In doing refills / refile especially when removing the cartridge, not to touch the CMOS pins (marked with a hand drawing on cross-examination). Pin is very sensitive (can be damaged) due to static electricity that comes from our bodies.
4. Use the same brand as the ink refill / refile. Even if different to make sure the ink has cardtridge completely blank / out. This is to avoid the clumping reaction ink ink from different brands that can clog the holes on the Head ink. This is usually neglected in the printer maintenance tips.
5. When printing using a clean paper and still “feasible” means no faded or “lungset” because of the shabby paper can cause freezes / stop printing or “mbulet” due to a slip of paper in the printer rollers. Also dusty paper can cause dust cling to the Head.
6. Clean dirty printer using a brush or a cloth rag. Special sections in use a small brush to achieve through a difficult time. When cleaning make sure the printer is in OFF state or Dead total (electric cable snapped).
7. Turn off the printer according to the procedure, namely by first pressing the “Off” and then pull the cable connected to the electricity. Do not immediately revoke its electrical cable … because at that time the printer System Bios is still working / active. This is also often forgotten in the printer how to care for. If it is often done will cause System Bios error (printer error / damage to the system) and must be re-Erase and Flash BIOS EEPROM. In this extrime conditions can damage the hardware BIOS (IC BIOS / EEPROM damaged) and it has a very severe …. Also turn off the printer immediately by pulling the electrical wires causing Capping Head printers at that time may not park in the correct position so it can settle and cause the ink to dry on the Head.
8. Use the printer cover to protect from dust. You can close it tightly with a cloth so that there is air exchange. Do not use the cover (closed meetings) with plastic because moisture can accelerate damage to the printer.
9. If your printer is often used (usually for business) often do not turn off the printer on every ngeprint out … let the printer still burning. This is to minimize Over the Limit Counter Hit Counter BIOS. All printers have a limited number of print (on average 2000 times). Each of us turned on the printer then the Counter will increase (considered 1 time printing). Imagine if during work hours (eg 8 hours) we turn off and turn on the printer up to 10 times or 20 times ….?!! then it will speed us to do Reset Counter on our printer BIOS.
10. Do not be too often print pictures / writing or fill dipertebal with a high density because it would aggravate the automatic Head work will shorten Head of age.
11. Special printers use infusions, … Put the parallel infusions Ink Tank (rather low bit) with Catridge. This is to keep the ink does not flow directly to the printer Catridge when not in use.
12. Clean / wash Foam / Spon Macgregor existing ink printer dibagian In 1 year at least once or if deemed hisapnya power was weakening. Usually marked with no process operation or a Head Cleaning luberan in dibagian printer ink. If it is allowed to be harmful to electronic circuits / mechanical printers. In some cases the tricks used to remove the incoming suction hose and accommodated in a separate container. This special no.12 if you have not experienced technician can ask for help.

Printer Care Tips or How to take care Printers carry over if we can correctly optimize printer performance and prolong the life of our printers use.

So hopefully this article useful … …

source : http://oprekzone.com/

Popularity: 1% [?]

No Comments

Leave a Reply

Admin

Subscribe

Login

Views

Categories

RSS Feed

adsensecamp

adsensecamp

Translate

feeds.feedburner.com

fusion.google.com

BlogTopSites.com